Ricoh FT5233 Service Manual page 837

REPLACEMENT AND ADJUSTMENT
16.2.2 Grip Solenoid Adjustment
[B]
Adjustment standard: 2.5 ± 0.5 mm
1. Remove the grip assembly (see the grip assembly removal).
2. Adjust the gripper solenoid stroke (2 screws).
When the solenoid plunger [A] is pressed so that the gripper arms [B]
touch each other, the gap (C) should be 2.5 ± 0.5 mm.
36
12 February 1992
[A]
(C)