Ricoh FT5233 Service Manual page 717

12 February 1992
10.17 PAPER FEED MOTOR SPEED CHECK AND
ADJUSTMENT
[B]
[D]
1. Remove the DF main PCB cover [A] (1 screw).
2. Set DIP SW101 [B] NO. 1, 2, and 4 to ON. Leave DIP SW 3 in the OFF
position. Then turn the main switch on.
3. If either the original set indicator [C] or the original feeding indicator [D] is
on, adjust the speed by turning VR-101. If the original set indicator is on,
turn VR-101 in the L direction. If the original feeding indicator is on, turn
VR-101 in the H direction. Adjust until both indicators stay off for at least 5
seconds.
REPLACEMENT AND ADJUSTMENT
[C]
[A]
49