Table of Contents
Advertisement
31 March, 1997
6. REPLACEMENT AND ADJUSTMENT
CAUTION
The danger of explosion exists if a battery of this type is incorrectly
replaced. Replace only with the same or an equivalent type recommended
by the manufacturer. Discard used batteries in accordance with the
manufacturer's instructions.
CAUTION:1) Before attempting any disassembly or assembly procedure, make
sure of the following:
• Turn off the machine.
• Disconnect the power cord.
• Disconnect the telephone cable(s).
• Disconnect the PC interface cable(s).
• Remove the ink cartridge and place it into the cartridge holder.
NOTE: 1) Do not touch the nozzle section of the ink cartridge. This helps prevent
the nozzles from clogging.
2) Do not touch the wiper blade on the maintenance unit. This also
prevents the nozzles from clogging.
3) Always store an extra cartridge (if unpacked) in the cartridge holder.
4) Ensure that the printer engine stops its maintenance operation before
turning off the machine.
5) Ensure that the cartridge is at the head capping position (right end)
before leaving the machine unplugged for long periods.
6-1
EXTERIOR
Advertisement
Table of Contents
