Troubleshooting; Loading Paper In The Main Paper Tray - Ricoh 4420NF Operating Instructions Manual

Loading Paper in the Main Paper Tray

If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
paper.
Important
❒ When loading paper, be careful
not to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not delivering a
copy or a received fax message.
❒ Do not use stapled paper or con-
ductive paper, such as carbon pa-
per or silver coated paper.
Note
❒ You can load up to 250 sheets in
the main paper tray.
❒ Regarding paper types and sizes
that can be used, see p.202 "Rec-
o m m e n d e d p a p e r s i z e s a n d
types", Advanced Features.
A A A A
Pull out the main paper tray until
it stops.
B B B B
Push the metal plate down, and
then square the paper and load it
into the tray.

4. Troubleshooting

Important
❒ Do not stack paper over the lim-
it mark.
Note
❒ Fan the paper before setting it in
the tray.
C C C C
Push the main paper tray in until
it stops.
87