21 May, 1999
PAPER FEED
6.8.2 PAPER FEED UNIT ASSEMBLY AND PAPER FEED MOTOR
[A]
H547R535.WMF
If the FCU, PSU and Power Pack were not removed previously, remove them now.
(See section 6.7)
Then remove the Main Frame [A].
A: Main Frame (4 screws)
[B]
[E]
[C]
[D]
H547R534.WMF
B: Paper Feed Unit Assembly (4 screws)
C: Paper Feed Motor (1 short screw with spacer and grounding wire, 1 screw with
spacer)
NOTE: Use 4mm screws [D] to secure the motor.
NOTE: The side of the motor with the harness [E] must be facing upward.
6-17