NEC Univerge SV8100 Features And Specifications Manual page 1292

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
16-01-03 Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-13-06 Class of Service Options
(Supplementary Service) –
Automatic Off-Hook Signaling
(Automatic Override)
2 - 1264
Description/Comments
Assign whether a call to busy
station Hunts (1) or Not Hunts (0)
to the next available member of
the Hunt Group (Department
Group).
 Refer Department Calling on
page 2-385 to set up the
Department Group.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On Call Queuing to the
extension. Set to Off for Station
Hunting to work.
Allow a busy extension to
Manually or Automatically receive
off-hook signals. Set to 0 for
Station Hunting to work.
UNIVERGE SV8100
Assigned Data
1
0 = Normal (Intercom
caller to busy
department member
hears busy)

1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Manually
1 = Automatically

(default = 1 for
COS 1~15)
Station Hunt
Level
2 3
