NEC Univerge SV8100 Features And Specifications Manual page 1510

Issue 7.0
Assign Trunks As Automated Attendant Trunks – Method 2
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
For Either Method:
Program
Program Name
Number
11-12-42 Service Code Setup (for Service
Access) – Flash on Trunk Lines
22-04-01 Incoming Extension Ring Group
Assignment
2 - 1482
Description/Comments
Assign 0 to each trunk you want to
ring into Voice Mail as a normal
line.
Assign Ring Group 102 for an
In-Skin/External Voice Mail, or 103
for a Central Voice Mail as the
destination.
Description/Comments
Program the dial access code
used for sending a hook flash to
Telco. This code is used for
Centrex Transfer using Digital
Voice Mail ports. If this code starts
#
with , Program 45-01-05 must be
set to 0.
Assign extensions to Ring Groups.
Calls ring extensions according to
Ring Group Programming
To enable Voice Mail Overflow,
assign selected extensions to a
Ring Group that ring for
unanswered DILs to Voice Mail
ports. In Program 22-06, enter 1 to
enable overflow ringing.
UNIVERGE SV8100
Assigned Data
1
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Assigned Data
1
SLT
#
(default = 3)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
UM8000 Mail
Level
2 3

Level
2 3

