NEC Univerge SV8100 Features And Specifications Manual page 803

UNIVERGE SV8100
Program
Program Name
Number
44-02-03 Dial Analysis Table for ARS/
F-Route Access – Additional
Data
44-05-01 ARS/F-Route Table – Trunk
Group Number
44-05-09 ARS/F-Route Table – Maximum
Digit
84-01-02 H.323 Trunk Basic Information
Setup – Number of G.711 audio
frames
84-01-03 H.323 Trunk Basic Information
Setup – G.711 VAD mode
84-01-04 H.323 Trunk Basic Information
Setup – G.711 Type
84-01-05 H.323 Trunk Basic Information
Setup – Number of G.729 audio
frames
84-01-06 H.323 Trunk Basic Information
Setup – G.729 VAD mode
84-01-07 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (min)
84-01-08 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer
(average)
84-01-09 H.323 Trunk Basic Information
Setup – G.729 Jitter Buffer (max)
IP Trunk – H.323
Description/Comments
If a Service Type is selected in
Program 44-02-02, set the
additional data, if required, for the
Pre-Transaction Table for
selecting ARS/F-Route (24 digits
#
max: 1~9, 0  , @). To enter a
wild card/don't care digit, press
Line Key 1 to enter an @.
Select the trunk group number to
be used for the outgoing ARS call.
Input the maximum number of
digits to send when using the
F-Route.
Define the number of G.711 Audio
Frames.
Enable/Disable the G.711 VAD
mode for H.323.
Define the G.711 type for H.323.
Define the number of G.729 audio
frames for H.323.
Enable/Disable the G.729 VAD
mode for H.323.
Define the G.729 jitter buffer
(minimum) for H.323.
Define the G.729 jitter buffer
(average) for H.323.
Define the G.729 jitter buffer
(maximum) for H.323.
Assigned Data
1
1 = Delete Digit =
0~255 (255 : Delete All
Digits)
2 = 0~500
(0 = No Setting)
3 = Dial Extension
Analyze Table Number
= 0~4
(0 = No Setting)
(default = 0)
0~100, 255
0 = No Setting
255 = Extension Call
(default = 0)
0~24
(default = 0)
1~4
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0 = A-law
1 = -law
(default = 1)
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0~270ms
(default = 30)
0~270ms
(default = 60)
0~270ms
(default = 120)
Issue 7.0
Level
2 3











2 - 775