NEC Univerge SV8100 Features And Specifications Manual page 1284

Issue 7.0
Required Component(s)
None
Related Features
Speed Dial – System/Group/Station
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-11-56 Service Code Setup (for Setup/
Entry Operation) – Telephone
Book Lock Service
2 - 1256
Description/Comments
Password to unlock telephone
book.
Dial the password then it

prompts you for an extension
number to unlock. Type in the
ext number you want to unlock
then you will be prompted for
the password. Type in the
password and then the
telephone book is unlocked.
When you dial the password to
unlock the telephone book it
removes the entry in 15-19-06
so the book is not locked
anymore.
To lock the telephone book do

the same steps as above when
the book is already unlocked.
It will then assign 15-19-06 for
you.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = no setting)

Speed Dial – Telephone Book
Level
2 3