NEC Univerge SV8100 Features And Specifications Manual page 1137

UNIVERGE SV8100
6. Select the schedule type:
Immediately after upload

At the time...

If you choose At the time..., select the date and time you want the CD-CP00-US to reset and switch over to the

new software version.
7. Click Start. PCPro uploads the firmware package file, and updates the system at the time you
specified in step 6.
WebPro
1. Obtain the firmware package file from NEC.
2. Open Internet Explorer and connect to the following URL where xxx.xxx.xxx.xxx is the IP address
of the CD-CP00-US.
http://xxx.xxx.xxx.xxx
3. Login to WebPro with a username and password defined in Program 90-02.
4. In the Administration section of the Home page, select the Firmware Upgrade Icon.
5. On the Firmware Update page, browse to the location of the firmware upgrade package file. For
example, the file name might be MainSWv0.36.pkg.
6. Select the schedule type:
Immediately after upload.

At the time...

If you choose At the time..., select the date and time you want the CD-CP00-US to reset and switch over to the

new software version.
7. Click Start. WebPro uploads the firmware package file, and updates the system at the time you
specified in step 6.
For additional information, refer to the UNIVERGE SV8100 PC Programming Manual.
Remote (System) Upgrade
Issue 7.0
2 - 1109