NEC Univerge SV8100 Features And Specifications Manual page 834

Issue 7.0
Program
Program Name
Number
20-09-03 Class of Service Options
(Incoming Call Service) – Sub
Address Identification
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
20-11-14 Class of Service Options (Hold/
Transfer Service) –
Trunk-to-Trunk Transfer
Restriction
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-13-23 Class of Service Options
(Supplementary Service) –
Display the Reason for Transfer
20-19-04 System Options for Caller ID –
Wait Facility IE Timer
20-25-14 ISDN Options – No response
Release Send
Operation
None
2 - 806
Description/Comments
Define whether or not an
extension displays the Caller Sub-
Address.
Turn Off or On an extension user
ability to transfer when the user
hangs up.
Turn Off or On the Trunk-to-Trunk
Transfer Restriction. If enabled,
Trunk-to-Trunk Transfer is
impossible.
Allow an extension user to set up
a tandem call automatically when
they hang up.
Select whether or not an extension
should display the reason a call is
being transferred to their
extension (Call Forward Busy, Call
Forward No Answer, DND).
This is the time an ISDN trunks
uses to determine the time the
system waits for the Caller ID
name from the Telco.
Operation mode setting for when
second T303 timer expires.
UNIVERGE SV8100
Assigned Data
1
0 = Deny
1 = Allow
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Allow
1 = Deny
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~64800 (seconds)
(default = 10)
0 = Off
1 = On
(default = 0)
ISDN Compatibility
Level
2 3






