NEC Univerge SV8100 Features And Specifications Manual page 1593

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Live Record does not work for conference calls.

Fixed Call Forwarding can be used to transfer a user's unanswered calls to their voice mail.

Call Forwarding does not have to be programmed manually by each user.

Caller ID information is passed from the Voice Mail to an extension for pre-answer display

on an unscreened transfer from Voice Mail.

Off-premise notification and external extensions require access to outside lines.

When the voice mail places a call on hold, it uses Group Hold. Any line appearances for the

trunk shows the hold flash rate, however, a user cannot pick up this call (a busy signal is

Updating the system time also updates the VM8000 InMail time.

VM8000 InMail and UM8000 Mail cannot be used at the same time in the same system.

The displayed message count for New and Saved messages does not update until the

mailbox user hangs up and calls back into the VM8000 InMail.

VM8000 InMail and Analog Voice Mail cannot be used at the same time in the same

The first port of VM8000 InMail must start with the first port of a group of eight station ports

that are not already used by telephones. For example one of the following ports: 1, 5, 9, 13,

.....233, 237, 241, 245, 249, etc. and uses the first port assigned + the next eight

consecutive ports.

With Version 3000 or lower software, the following rules apply when programming

VM8000 InMail ports in program 47-01-17 on a system that has the basic 64 port license:

When a PZ-ME50-US is NOT mounted to CCPU-US:

When a PZ-ME50-US is mounted to CCPU-US:

With Version 4000 or higher software, the following rules apply when programming

VM8000 InMail ports in Program 47-01-17 on a system that has the basic 64 port license:

When a PZ-ME50-US is NOT mounted to CCPU-US:

When a PZ-ME50-US is mounted to CCPU-US:

VM8000 InMail

The first port of VM800 InMail must be assigned to port 57 or lower.

The number of licensed VM8000 InMail ports do not take away from the 64 port license.

There can still be a combination of 64 trunks, TDM phones and IP phones.

The first port of VM800 InMail can be assigned above port 64.

The first port of VM800 InMail must be assigned to port 49 or lower.

The number of licensed VM8000 InMail ports do not take away from the 64 port license.

There can still be a combination of 64 trunks, TDM phones and IP phones.

The first port of VM800 InMail can be assigned above port 64.