NEC Univerge SV8100 Features And Specifications Manual page 1359

UNIVERGE SV8100
Program
Program Name
Number
51-07-02 NetLink Primary Compulsion
Specification Setting – Package
Reset Timing Option
51-08-01 Primary NetLink Setting – IP
Address of New Primary System
51-08-02 Primary NetLink Setting –
System ID of New Primary
System
51-09-01 NetLink Communication Port
Settings – Primary Waiting Port
51-09-02 NetLink Communication Port
Settings – Communication
Waiting Port
51-09-03 NetLink Communication Port
Settings – Secondary
Communication Port
51-09-04 NetLink Communication Port
Settings – Primary Search Port
51-09-05 NetLink Communication Port
Settings – Primary Detection
Port
SV8100 NetLink
Description/Comments
When Forced Change Primary
System is done, all packages
reset. This option can select the
timing of package reset.
0 = Reset when all packages are
idle, otherwise reject Primary
System Integration.
1 = Anytime
Enter target IP address for New
Primary system. When the Forced
Change Primary system is done,
this setting is erased.
When set to 0, top priority Primary
system is assumed to be the new
Primary system.
Set the communication port that
the Primary system uses to
communicate with the Secondary
system.
Set the Port used to communicate
between nodes. It is always
opened by all nodes.
Secondary system communicates
with Primary system at this port
number. If 0 is specified,
temporary port is dynamically
selected.
When Fail-Over occurred, each
system communicates with other
system at this port number.
If 0 is set, temporary port is
selected dynamically.
If 0 is not specified, the number
and continuous maximum 50
number is used.
(e.g. 5000 is specified 5001,
5002...5049 are used).
Enter port number to seek the Top
Priority Primary system.
If 0 is specified, temporary port is
selected dynamically.
Assigned Data
1
0 = Off
1 = On
(default = 0)
0.0.0.0~
126.255.255.254
128.0.0.1~
191.255.255.254
192.0.0.1~
223.255.255.254
(default = 0.0.0.0)
0~50
(default not assigned)
0~65535
(default = 58000)
0~65535
(default = 58001)
0~65535
(default = 0)
0~65535
(default = 0)
0~65535
(default = 0)
Issue 7.0
Level
2 3








2 - 1331