NEC Univerge SV8100 Features And Specifications Manual page 1108

Issue 7.0
Program
Program Name
Number
15-02-10 Multiline Telephone Basic Data
Setup – Ringing Line Preference
for Trunk Calls
15-06-01 Trunk Access Map for
Extensions
15-07-01 Programmable Function Keys
21-02-01 Trunk Group Routing for
Extensions
22-01-01 System Options for Incoming
Calls – Incoming Call Priority
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
2 - 1080
Description/Comments
Enter 1 if lifting the handset should
answer ringing Prime Line; enter 0
to seize idle line appearance.
Set assignment so extension(s)
can have access to Prime Line.
Deny outbound access to
extensions that should not have
Prime Line.

Assign a 00(ICM key) on phones
to get an Intercom dial tone when
both Program 15-01-02 and
20-08-21 are turned on for the
extension.
Assign extension(s) to a Prime
Line route for outgoing Prime Line
access.
Determine if Intercom calls or
trunk calls have answer priority
when both are ringing
simultaneously.
Assign extension(s) to a ring
group that consists of a Prime
Line.
Assign a Prime Line to a ring
group.
UNIVERGE SV8100
Assigned Data
1
0 = Idle (Off)
1 = Ringing (On)
(default = 1)
Trunk Access Maps:
1~200

(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Trunk Groups: 1~100
Day/Night Mode: 1~8
Route Table Number:

0~100
(0 = No Setting)
(default = 1)
0 = Intercom call
priority
1 = Trunk call priority
(default = 1)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
Prime Line Selection
Level
2 3




