NEC Univerge SV8100 Features And Specifications Manual page 879

UNIVERGE SV8100
Operation
There are four different ways to activate the licenses in the system:
Manual Enter Software Key Code
1. In Program 10-48-01 enter the Software Key Code.
2. In Program 10-48-02 enter the activation code.
3. In Program 10-48-03 enter the feature code(s) in the Software Key Code.
4. In Program 10-48-03 hit the Submit Softkey.
Manually Load the License File via the USB Drive
1. Manually register the software key.
2. Save the License file to the USB Drive.
3. Install the USB Drive onto the CD-CP00-US.
4. In Program 10-49-01 assign to 1 and then hit transfer.
Multiple License files can be loaded at the same time.

Upload the License File via WebPro/PCPro
1. Manually register the software key.
2. Save the license file.
3. Connect to the system.
4. Go to the Feature Activation screen.
5. Click on Load File.
6. Select the location of the license file to upload.
Auto Register the License for the System
1. Connect to the system.
2. Go to the Feature Activation screen.
3. Enter email Address and Password.
4. Add Software Key code(s).
If left blank, it registers all attached licenses for the Hardware Key code.

5. Click on Auto Register.
Licensing
Issue 7.0
2 - 851