NEC Univerge SV8100 Features And Specifications Manual page 1763

UNIVERGE SV8100
3. Dial the function you want.
7 = ecord
R
5 = isten
L
3 = rase
E
If you dialed 7 to record, press # to end the recording.

If you dialed 5 to listen, you can dial 5 to listen to the message again.

To Record the General Message again, go back to step 1.

If you dialed 3 to erase the General Message, you must go to step 4 (hang up). To cancel without erasing on a

multiline terminal, press HOLD instead and go back to step 1.
4. Hang up when you are done.
Time, Date and Station Number Check
To check the extension number of any multiline terminal:
1. Do not lift the handset or press Speaker.
2. Dial 6 for extension number.
To check the system time and date from any multiline terminal extension:
1. Do not lift the handset or press Speaker.
2. Dial 8 for time and date.
900 Preamble
To answer a 900 Preamble call:
1. Answer the ringing call.
The line key or Call Appearance (CAP) key turns solid red as the system plays the preamble to the caller.

2. When you hear two beeps and the line key turns green, converse with the caller.
Voice Response System (VRS)
Issue 7.0
2 - 1735