NEC Univerge SV8100 Features And Specifications Manual page 1448

Issue 7.0
Program
Program Name
Number
15-07-01 Programmable Function Keys
20-02-04 System Options for Multiline
Telephones – Retrieve the Line
After Transfer
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
20-06-01 Class of Service for Extensions
20-09-07 Class of Service Options
(Incoming Call Service) – Call
Queuing
20-11-06 Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
20-11-07 Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
20-11-08 Class of Service Options (Hold/
Transfer Service) – Transfer
Information Display
20-11-11 Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
2 - 1420
Description/Comments
Extension users may want a
function keys programmed for
Transfer (code 06).
Enable/Disable an extension user
ability to answer a call after it is
transferred, but before it is
answered.
For a busy single line (500/2500
type) telephones, set the mode
used to answer a camped-on trunk
call.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to have calls queued if a call
rings the extension when it is
busy.
Turn Off or On an extension user
ability to use Unscreened
Transfer.
Turn Off or On an extension user
ability to use Transfer Without
Holding.
Turn Off or On an extension ability
for incoming Transfer preanswer
display.
Turn Off or On an extension user
ability to use Automatic On-Hook
Transfer.
UNIVERGE SV8100
Assigned Data
1
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0 = Not Holding (No
Keep)
1 = Holding (Keep)
(default = 1)
0 = Hookflash
(Hooking)
1 = Hookflash +
Service Code 654
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 1 for
COS 1~15)
0 = Off
1 = On

(default = 0 for
COS 1~15)
0 = Off
1 = On

(default = 1 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Level
2 3




Transfer