NEC Univerge SV8100 Features And Specifications Manual page 1714

Issue 7.0
Program
Program Name
Number
15-02-35 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Calling Extension
15-02-36 Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
15-02-37 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
15-02-38 Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
15-03-01 Single Line Telephone Basic
Data Setup – SLT Signaling Type
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function –
For External Module
15-03-16 Single Line Telephone Basic
Data Setup – Special DTMF
Protocol Send
2 - 1686
Description/Comments
Select the Message Waiting flash
pattern for the station that set the
Message Waiting reminder.
Select the Message Waiting flash
pattern for the station that receives
the Message Waiting reminder.
Select the color of the large LED
when a voice mail message is
waiting at the extension.
Select the cycle method that the
large LED flashes when the
extension has a VM Message
Waiting set to an extension.
For each UNIVERGE SV8100
voice mail extension, set this
option to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Set to 0 when voice mail is used or
the integration code for the
disconnect function is incorrect.
Determine whether or not to send
the extension number of the
phone forwarded to the extension
when Program 15-03-03 is set to 1
and not in the VM group.
UNIVERGE SV8100
Assigned Data
1
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 7)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
0 = Green
1 = Red
(default = 1)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
0 = DP

1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)

0 = Disable

1 = Enable
(default = 0)
0 = No
1 = Yes
(default = 0)
Voice Mail Integration (Analog)
Level
2 3




