NEC Univerge SV8100 Features And Specifications Manual page 1418

Issue 7.0
Program
Program Name
Number
24-02-10 System Options for Transfer –
Disconnect Trunk-to-Trunk
25-07-07 System Timers for VRS/DISA –
Long Conversation Warning
Tone Time
25-07-08 System Timers for VRS/DISA –
Long Conversation Disconnect
Time
Method C – Tandem Trunking on Hang up
Program
Program Name
Number
14-01-04 Basic Trunk Data Setup –
Transmit Gain Level for
Conference and Transfer Calls
14-01-05 Basic Trunk Data Setup –
Receive Gain Level for
Conference and Transfer Calls
14-01-13 Basic Trunk Data Setup –
Trunk-to-Trunk Transfer
20-06-01 Class of Service for Extensions
20-07-11 Class of Service Options
(Administrator Level) – Forced
Trunk Disconnect (analog trunk
only)
2 - 1390
Description/Comments
This timer starts after the
Trunk-to-Trunk warning tone is
heard.
Determine the time a DISA caller
or any trunk-to-trunk (such as
Tandem Trunking) conversation
can talk before the Long
Conversation tone is heard.
Determine the time the system
waits before disconnecting a DISA
or any trunk-to-trunk (such as
Tandem Trunking) call after the
Long Conversation tone is heard.
Description/Comments
Select the Transmit CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
Select the Receive CODEC gain
level used by the trunk when it is
part of an Unsupervised
Conference.
For each trunk, enter 1 to enable
loop supervision.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Forced Trunk
Disconnect. This allows the
extension user to disconnect an
Unsupervised Conference in
progress.
Tandem Trunking (Unsupervised Conference)
UNIVERGE SV8100
Assigned Data
1
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 3600)
0~64800 (seconds)
(default = 10)
Assigned Data
1
1~63(-15.5dB~
+15.5dB in 0.5dB
intervals)
[default = 32 (0dB)]
1~63(-15.5dB~
+15.5dB in 0.5dB
intervals)
[default = 16 (-8dB)]
0 = Disable

1 = Enable
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~14)
(default = 1 for
COS 15)
Level
2 3



Level
2 3


