NEC Univerge SV8100 Features And Specifications Manual page 1611

UNIVERGE SV8100
Program
Program Name
Number
47-02-10 VM8000 InMail Station Mailbox
Options – Forced Unscreened
Transfer
47-02-11 VM8000 InMail Station Mailbox
Options – Auto Time Stamp
47-02-12 VM8000 InMail Station Mailbox
Options – System Administrator
47-02-13 VM8000 InMail Station Mailbox
Options – Dialing Option
47-02-14 VM8000 InMail Station Mailbox
Options – Next Call Routing
Mailbox
VM8000 InMail
Description/Comments
Enable/Disable Automated
Attendant Forced Unscreened
Transfer for the Subscriber
Mailbox. If enabled, each
Screened Transfer (TRF) to the
extension is converted to an
Unscreened Transfer (UTRF). If
disabled, Screened Transfers from
the Automated Attendant occur
normally.
Enable/Disable Auto Time Stamp
for the Subscriber Mailbox. If
enabled, after the subscriber
listens to a message VM8000
InMail announces the time and
date the message was left. Auto
Time Stamp also announces the
message sender (if known).
A subscriber can also enable Auto
Time Stamp from their mailbox.
Designate the Subscriber Mailbox
as a System Administrator. This
allows the subscriber to use the
SA options after logging into their
mailbox.
Dialing Option provides additional
dialing options for Next Call
Routing Mailbox calls (see Next
Call Routing Mailbox below). If
enabled, a caller who accesses
the Subscriber Mailbox to leave a
message can dial any option in the
Next Call Routing Mailbox Dial
Action Table. If disabled, the caller
can dial only 0 (to use the Next
Call Routing Mailbox 0 action).
Assign a Next Call Routing
Mailbox to the Subscriber Mailbox.
This provides callers with
additional dialing options while
listening to a Subscriber Mailbox
recorded or default greeting. The
digits the caller can dial depends
on the setting of the Next Call
Routing Mailbox and Alternate
Next Call Routing Mailbox options.
Assigned Data
1
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = No (Disable)
1 = Yes (Enable)
Default:
Mailbox 1 (101)=1
Other mailboxes=0
0 = Disable
1 = Enable
(default = 0)
Call Routing Mailbox
Number (1~3 digits,
01~016) No entry
(Entered by pressing
CLEAR)
Default:
1 (Call Routing Mailbox
01)
By default, Call
Routing Mailbox
numbers are 01~08
Issue 7.0
Level
2 3





2 - 1583