Ipk/Ipk Ii Migration - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

This feature added with Version 2500.

DTU/DTP terminal support is available with Version 2500 (2.51 or higher).

With Version 4000 (4.01 or higher) software, a combination of IPK/IPK II cabinets and SV8100

chassis are supported.

The IPK/IPK II Migration package allows the user of an existing NEC IPK/IPK II platform to utilize the

enhanced capabilities of the SV8100.

In a NetLink environment, IPK/IPK II Migration can only be used in the Primary system.

Secondary systems do not support IPK/IPK II Migration.

IPK/IPK II Migration feature available with Version 2500 or higher.

DTU/DTP terminal support is available with Version 2500 (2.51 or higher).

The IPK/IPK II Migration package (MGN-U10 ETU) is available only with the SV8100.

The MGN-U10 ETU is only supported in the B64-U10, U20, and U30 KSU's.

When migrating from an IPK or IPK II system, the system database cannot be converted

and must be rebuilt.

The MGN-U10 ETU provides a connection between the IPK/IPK II and the UNIVERGE

SV8100 system. The MGN-U10 ETU is installed in the CPU/EXP slot of the IPK/IPK II KSU.

Refer to the UNIVERGE SV8100 System Hardware Manual for a complete list of supported

The IPK/IPK II system is limited to 18 slots total.

MEGACO telephone is not supported.

An IPK/IPK II system can support the migration card, provided the cards and terminals are

listed below as being supported. It may be necessary to upgrade firmware as noted.

DT300 series terminals are not supported in a migration system unless connected to a

DLCA blade in the controlling SV8100 chassis.

IPK/IPK II Migration