NEC Univerge SV8100 Features And Specifications Manual page 1506

Issue 7.0
Program
Program Name
Number
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
15-07-01 Programmable Function Keys
16-02-01 Department Group Assignment
for Extensions
2 - 1478
Description/Comments
Enable/Disable the Caller IFD FSK
signal for an external Caller ID
rd
Module or a 3 -Party vendor
telephone with Caller ID display.
If voice mail is used, set this to 0
for the system integration code to
be correct.
Assign a Voice Mail key to an
extension. You must enter the
Voice Mail key code (code 77)
followed by:
Your own extension number if

you are setting up your own
Voice Mail key.
A virtual extension number if

you are setting up a Message
Center key for a virtual
extension.
A co-worker's extension

number if you are setting up a
Message Center key for an
installed extension.
An uninstalled extension

number if you are setting up a
Message Center key for an
uninstalled extension.
(Optional) Assign a Voice Mail

Record key to an extension
(code 78).
(Optional) Assign a Personal

Answering Machine Emulation
key (code 16).
(Optional) Use a Call Redirect

key (49) to allow a user to
transfer a call to another
extension or voice mail without
answering the call.
Set the Department Group called
by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
When setting up hunt group

priorities the VM ports must
be assigned as port 1 =
priority 1, port 2 = priority 2
and so on. Failure to do this
causes the VM to answer but
no audio is heard.
UNIVERGE SV8100
Assigned Data
1
0 = Disable (Off)
1 = Enable (On)
(default = 0)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)

Department Groups
1~64
Priority 1~999
Default = 1
extensions in
Department Group 1

with priority in port
order:
Port 1 priority = 1
Port 256 priority = 256
UM8000 Mail
Level
2 3