NEC Univerge SV8100 Features And Specifications Manual page 1115

UNIVERGE SV8100
Program
Program Name
Number
22-02-01 Incoming Call Trunk Setup
22-04-01 Incoming Extension Ring Group
Assignment
22-05-01 Incoming Trunk Ring Group
Assignment
22-07-01 DIL Assignment
Operation
To place a call on your Private Line:
1. Press Private Line key and then press Speaker or lift the handset.
2. Dial the number.
Private Line
Description/Comments
Set the Trunk Service to Type 4 if
routing unanswered Private Lines
to voice mail or 0 if not routing to
voice mail.
Assign extension to Private Line
ring group. Set the ringing in
Program 22-06 – use option 1 for
Incoming or Both Way Private
Lines. Use option 0 for Outgoing
Private Lines. Do not assign any
other extensions to the Private
Line ring group.
Assign Private Line to an unused
Private Line ring group (i.e., a ring
group just for the Private Line).
If routing unanswered Private
Lines to voice mail, assign DILs to
the extensions.
Assigned Data
1
Ring Groups: 1~100
0 = Normal
1 = VRS (second dial
tone if no VRS
installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Maximum eight digits
Default:
Extensions 101~108
(first eight ports) ring
for incoming Ring
Group 1 calls. No
other extensions ring
for incoming Ring
Group 1 calls.
Incoming Group
Number for Day/Night
Mode (1~8):
0 (No Setting)
001~100
(Incoming Group)
102 (In-Skin/ External
Voice Mail or VM8000
InMail)
(default = 1)
Extension Number

(maximum eight digits)
(default not assigned)
Issue 7.0
Level
2 3


2 - 1087