NEC Univerge SV8100 Features And Specifications Manual page 1445

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

With Transfer to Busy Extensions enabled (Program 24-02-01 = 1), Call Forwarding with

Both Ringing offers a unique option. A transferred call waits for either the forwarding or

destination extension to become free. The call goes through to the extension that first

becomes available. If neither extension becomes free in the Transfer Recall Time, the call

recalls the transferring extension.

With Transfer to Busy Extensions disabled (Program 24-02-02 = 0), you must also set Program 20-09-07

for the extensions COS to 0 to disable call queuing and Program 20-13-06 to set Automatic Off-hook

Signaling to manual.

An existing call can be transferred into a conference call.

Meet Me Paging Transfer allows the user to page a co-worker and have the call

automatically transferred when the co-worker answers the page.

When transferring, an extension user can press a One-Touch key instead of dialing the

extension number.

Serial call allows transferring a call so it automatically returns to the transferring extension

when completed.

When a multiline terminal user is on a call, they can transfer to another station by pressing

a DSS key for that station. It is not necessary to press Transfer to transfer to another

station with a DSS key.

When a multiline terminal user is on a call, they must press transfer to transfer a call off site with a DSS

The following features require certain tones be changed in Program 80-01-02. Refer to the

table in the

Call Holding

Busy Greeting

Call Screening

Await Answer Transfer

A Trunk-to-Trunk transfer can be established by the following operation:

1. While talking to an outside party, press Hold.

2. Access a second outside line and dial the desired number.

3. Press Transfer to complete the Trunk-to-Trunk transfer.

When the second call is to be transferred to another station (Not Trunk-to-Trunk), the user should press

Hold at step 3, then dial the desired station and press Transfer to complete the transfer.

If station A calls Station B, and station A puts station B on hold and then calls station C,

station C cannot transfer the call.

VM8000 InMail

feature programming section for settings: