NEC Univerge SV8100 Features And Specifications Manual page 852

Issue 7.0
Dial Access to Attendant

Direct Inward Dialing

Dual Hold

Elapsed Time Display

Flexible Numbering of Stations

Hands-Free Answerback

Hot Line

Link Reconnect

Multiple Call Forwarding – All Calls

Multiple Call Forwarding – Busy/No Answer

Paging Access

Quick Transfer to Voice Mail

Station-to-Station Calling

Uniform Numbering Plan

Voice Call

Voice Mail Integration

Not supported with VM8000 InMail.

Not supported with NEAX PBX.

Not supported with IPK/IPK II.

Conditions
The CD-PVAA blade requires the K-CCIS – IP with PVA with PVA Compact Flash card.

The K-CCIS – IP with PVA application can be licensed in increments of four or a single 24

ports.
Each CD-PVAA blade reduces the maximum capacity of trunks in the system.

The CD-PVAA is required for K-CCIS – IP with PVA connection to the IPK and IPK II.

When connecting the CD-PVAA K-CCIS – IP with PVA application to the IPK and IPK II, the

PVA(X)-U ( ) ETU installed in the IPK and IPK II must be upgraded to the latest Service
Pack and Firmware.
One CD-PVAA is required to support up to 24 channels of K-CCIS – IP with PVA.

Up to eight CD-PVAA blades can be installed in the UNIVERGE SV8100.

2 - 824

UNIVERGE SV8100
K-CCIS – IP with PVA