Table 2-37 K-Ccis Main And Remote System Voip Resources Used - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

CCIS Networking via IP (Peer-to-Peer Connections Basis)

IP-KCCIS has been improved to support Peer-to-Peer calls between IP Terminals residing in different

offices, without using DSP resources. With Version 4000 or lower software, two DSP resources in

each office/system were consumed for calls between an IP Terminal and an IP Terminal. Refer to the

SV8100 Networking manual for more information.

Table 2-37 K-CCIS Main and Remote System VoIP Resources Used

The number in

each box indicates

how many VoIP

resources are used

M = Main K-CCIS System

R = Remote K-CCIS System

Main software Version 4000 (4.01 or higher) and the Version 4000 Main Version license

is required for the SV8100 to support Peer-to-Peer in a CCISoIP network.

DT700 terminals are supported for Peer-to-Peer connections via a P2P CCIS call.

Standard SIP terminals are not supported for Peer-to-Peer connection.

If either Programs10-26-04 or 50-15-04 are set to 0 (Disable) in system A, Peer-to-Peer is

disabled for system A and any remote systems when calling system A.

When port translation is done through a NAT router, Peer-to-Peer is disabled.

When RTP encryption is enabled, Peer-to-Peer is disabled.

When connecting to a SV8300 or SV8500 using CCISoIP, Program 84-21-21 must be set to

When connecting to other SV8100s using CCISoIP, Program 84-21-21 must be set the

same in all systems.

UNIVERGE SV8100

Remote System