NEC Univerge SV8100 Features And Specifications Manual page 1710

Issue 7.0
MSG Key will Operate as Voice Mail Key
The system enhances a telephone MSG key function when connected to a system which has voice mail
installed. When an extension receives a voice mail, the MSG key can be used to check the number of
messages in voice mail, or call the voice mail to listen to the messages.
Analog Voice Mail Protocol Leading and Trailing Digits Assignment
The Analog Voice Mail Protocol Leading Digits (chassis to VM) and the Trailing Digits format can be
changed.
The following chart illustrates the input data for Program 45-04-01~Program 45-04-09 (Voice Mail Digit
Add Assignment) based on the setting in Program 45-01-15 (Analog Voice Mail Protocol Selection) and
Program 45-01-17 (Reply Mailbox Number). If Program 45-01-15 is set to 0 it uses the Fixed Memory
Location for the Leading Digits or, if set to 1 it uses Program 45-04-01~Program 45-04-09 for the
Leading Digits. If Program 45-01-17 is set to 0, it does not have the calling party in the Trailing Digits.
 The default values for Program 45-04-01~Program 45-04-09 are not assigned.
Use the chart below to determine what leading and trailing digits are sent to the Analog Voice Mail
System.
Program
45-04-01 - Remote Logon
(Internal)
Up to four digits 
Default not assigned
45-04-02 - Direct Logon
Up to four digits 
Default not assigned
45-04-03 - Transfer
Message
Up to four digits 
Default not assigned
45-04-04 - Forward-All
Up to four digits 
Default not assigned
2 - 1682
Program 45-01-15 Program 45-01-15
(0 = Fixed) (1 = Program)
Program 45-01-17 Program 45-01-17
(1=Yes or 0=No) (1=Yes)
Up to four digits +
1XXX
#
XXX Up to four digits +
Up to four digits +
2YYY
2XXXYYY
Up to four digits +
XXXYYY
Up to four digits +
3UUUZZZ
UUUZZZ
Program 45-01-15
(1=Program)
Program 45-01-17
(0=No)
Up to four digits +
XXX XXX
Up to four digits +
XXX XXX
Up to four digits +
YYY YYY
Or
Up to four digits +
ZZZ
UNIVERGE SV8100
Description
Remote Log-On (Internal)
Internal call to VM from extension

XXX.
User has not indicated intent to

enter mail box.
Direct Log-On
Connect user to mail box for

extension XXX.
Transfer Message
User is transferring a call to VM

Record a message to be placed in

mail box of extension YYY.
Record Message for Called Extension
(QVM)
Record a message to be placed in

mail box of extension YYY.
Store source extension number

XXX for automatic reply feature.
Forward-All
Extension or Trunk UUU that

called extension ZZZ and was
forwarded to the Voice Mail Box
of extension ZZZ.
Voice Mail Integration (Analog)