NEC Univerge SV8100 Features And Specifications Manual page 1030

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Block Manual Off-Hook Signals

This Class of Service option enables/disables a busy extension ability to block off-hook signals

manually sent from a co-worker. If disabled (not blocked), callers can dial

signal the extension. If enabled (blocked), nothing happens when the caller dials

Block Camp-On

If an extension has Block Camp-On enabled, callers to the extension cannot dial 2 to Camp-On

after hearing busy or busy/ring. If the extension has Block Camp-On disabled, callers are not

prevented from dialing 2 to Camp-On after hearing busy or busy/ring. This is set in the called

extension Class of Service.

An extension user cannot Camp-On to a busy extension or leave a callback if Off-Hook

Signaling has already gone through. Off-Hook Signaling allows an extension to block a

caller's ability to dial

You cannot send off-hook signals to an extension busy on a Handsfree (Speakerphone)

call. The called extension large LED flashes fast, with no ringing.

The setting of Program 20-13-06 affects the BLF display for Hotline and Reverse Voice

Over. Refer to

You cannot send off-hook signals to an extension that is already receiving a voice

announcement.

An extension user can store the Off-Hook Signaling Service Code (709) under a

One-Touch Key to provide quick Off-Hook Signaling access.

An extension set as Operator in Program 20-17-01 does not follow settings in Program

20-13-05, Program 20-13-06 or Program 20-09-07 and always receives Off-Hook

Program 20-09-07 and 20-13-06 must be set to 1 in Class of Service for a normal extension

to receive automatic Off-Hook Signaling.

Off-Hook signaling is not supported for Wireless DECT (SIP) telephones.

Default Setting

Reverse Voice Over

at busy or busy/ring to

features for additional information.

UNIVERGE SV8100

Off-Hook Signaling