Ip Trunk - H.323 - NEC Univerge SV8100 Features And Specifications Manual

Issue 7.0
Program
Program Name
Number
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
21-17-01 IP Trunk (SIP) Calling Party
Number Setup for Trunk
21-18-01 IP Trunk (H.323) Calling Party
Number Setup for Extension – IP
Trunk (H.323) Calling Party
Number Setup for Extension
22-02-01 Incoming Call Trunk Setup
44-02-01 Dial Analysis Table for ARS/
F-Route Access – Dial
44-02-02 Dial Analysis Table for ARS/
F-Route Access – Service Type
2 - 774
Description/Comments
Turn Off or On the Caller ID
display at an extension.
Assign the Caller Party Number for
each IP trunk. The assigned
number is sent to the central
office when the caller places an
outgoing call. If the Calling Party
Number is assigned by both
Program 21-17 and Program
21-18/ 21-19, the system uses the
entry in Program 21-18/21-19.
Assign the Calling Party Number
for each extension. The assigned
number is sent to the exchange
when the caller places an outgoing
call.
Assign the incoming trunk type for
each trunk.
Set the number of digits to be
analyzed by the system for ARS
routing.
Set the Service Type (0~3) for the
Pre-Transaction Table for
selecting ARS/F-Route.
UNIVERGE SV8100
Assigned Data
1
0 = Off
1 = On

(default = 0 for
COS 1~15)
Up to 16 Digits
#
(1~0, , )

(default not assigned)

Up to 16 digits
#
(1~0, , )


(default not assigned)
Trunks 1~200
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID

4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
(default = 0)
Up to eight digits
(Use line key 1 for a
'Don't Care' digit, @)
(default not assigned)
0 = No Setting (None)
1 = Extension Call
(Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension
Analyze Table (Option)
(default = 0)
IP Trunk – H.323
Level
2 3

