Multiple Trunk Types - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The UNIVERGE SV8100 supports many different Trunks in the system (DID, E&M Tie Lines, Loop Start,

Ground Start, ISDN BRI, ISDN PRI, and T-1 trunks). The system supports up to 200 trunks in the

expanded port package, and a maximum of 56 trunks in the basic port package.

Refer to the

Direct Inward Dialing (DID)

E&M Tie Lines

E&M Tie Lines (4-Wire) can be connected to the system to provide communication between remote

systems and facilities. The system can receive and/or transmit DTMF or DP signals on E&M Tie Lines.

Ground Start Trunks

Ground Start Trunks can be connected to the system. Ground and Loop Start Trunks can be mixed in

the system per trunk. Ground Start Trunks are provided with line supervision to reduce call collisions.

Loop Start Trunks

Loop Start Trunks can be connected to the UNIVERGE SV8100 system. Loop Start is assigned per

trunk at the associated blade. Ground Start and Loop Start Trunks can be mixed in the system per

Refer to the

ISDN Compatibility on page 2-791

Refer to the

ISDN Compatibility on page 2-791

Refer to the

T1 Trunking (with ANI/DNIS Compatibility) on page 2-1365

Each CD-4ODTA supports four 4-wire E&M Tie Lines.

Ground Start Trunks do not support Caller ID.

Multiple Trunk Types

feature for related information.