NEC Univerge SV8100 Features And Specifications Manual page 1739

UNIVERGE SV8100
Related Features
Conference
Off-Hook Signaling
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-41 Service Code Setup (for System
Access) – Voice Over
11-16-08 Single Digit Service Code Setup
– Voice Over
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
Voice Over
Description/Comments
Set the service code used for the
Voice Over feature.
 To use Service Code 690 for
Voice Over, Program
11-16-08 (Single Digit
Service Code Setup – Voice
Over) must be undefined.
Set the Service code used for the
Voice Over feature.
Assign a function key for Voice
Over (code 48).
Assign a Class of Service (1~15)
to an extension.
Assigned Data
1
MLT
(default = 690)
(default = 6)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
Issue 7.0
Level
2 3



2 - 1711