NEC Univerge SV8100 Features And Specifications Manual page 1238

Issue 7.0
Conditions
ESN setup requires SMB800 Communications Analyst build 5242 or higher and SMB patch1 to

be installed prior to running the ESN installation.
ESN Alarm and ESN ALI Lookup works with Adobe Acrobat Reader version 7.0 and above

only.
The EOMS Service needs to be restarted after SQL Server restarts, the PC restarts or

whenever the Microsoft SQL Server service is started after the EOMS service enters a
running state.
Changes made in the Administrator Console requires restarting all the EOMS services to

take effect.
Propagating the changes made using the Administration Console to the ESN Alert clients

will require the Admin.ini file to be shared for the clients to access them over a network.
The Licence.lic file from the SMB8000 Communications Analyst needs to be made

available to the ESN Administrator Console for the ESN related license.
ESN Alarm clients installed on VM ware PC's can not listen to the audio alarms.

Firewall/Antivirus rule exceptions need to be made for the services to communicate.

Platform Requirements
Ensure the following hardware and software requirements are met before starting the E911 Security
Notification solution installation.
 These recommendations are to be used as a minimum requirements guideline only. The actual requirements may vary
based on the specific needs such as the call volume, number of remote locations etc.
ESN Solution
Hardware:

Pentium 1.8 GHz core 2 duo or above

4 GB RAM

20 GB of free hard disk space

SVGA monitor 1024X 768 resolution

Network Interface card (NIC)

Supported Operating Systems:

Windows Server 2003 with SP2

Windows XP Professional with SP3

2 - 1210
UNIVERGE SV8100
SMB8000 Communications Analyst