NEC Univerge SV8100 Features And Specifications Manual page 833

UNIVERGE SV8100
Program
Program Name
Number
35-02-16 SMDR Output Options – Trunk
Name or Received Dialed
Number
General ISDN Programs
Program
Program Name
Number
14-01-13 Basic Trunk Data Setup – Trunk-
to-Trunk Transfer
15-02-29 Multiline Telephone Basic Data
Setup – PB Back Tone Level
15-07-01 Programmable Function Keys
20-06-01 Class of Service for Extensions
20-09-02 Class of Service Options
(Incoming Call Service) – Caller
ID Display
ISDN Compatibility
Description/Comments
Determine how the SMDR should
print incoming calls on ANI/DNIS
or DID trunks. If set to 1, ANI/DNIS
trunks can print DNIS digits, if set
to 0 trunk names are printed
instead.
For additional SMDR

Services refer to Station
Message Detail Recording
on page 2-1267.
Description/Comments
For each trunk that should be able
to participate in a tandem call,
enter 1. To disable a trunk from
Tandem Trunking, enter 0.
Required for 2 B-Channel transfer.
Adjust the PB Back Tone level
when calling an ISDN line.
Assign a function key for Caller ID
Block for ISDN (63) if required.
Assign a Class of Service to
extensions.
Turn Off or On the Caller ID
display at an extension.
Assigned Data
1
0 = Trunk Port
Name
1 = Received
Dialed Number
2 = Both
(default = 0)
Assigned Data
1
0 = Disable
1 = Enable
(default = 1)
1~63 (-15.5dB~
+15.5dB)
(default = 32) 0dB
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
Issue 7.0
Level
2 3

Level
2 3




2 - 805