NEC Univerge SV8100 Features And Specifications Manual page 1760

Issue 7.0
Program
Program Name
Number
40-10-06 Voice Announcement Service
Option – Set VRS Message for
Private Call Refuse (VRS Msg
Private Call)
40-10-07 Voice Announcement Service
Option – Set VRS Message for
Caller ID Refuse (VRS Msg CID)
40-11-01 Preamble Message Assignment
47-03-02 VM8000 InMail Group Mailbox
Options – Mailbox Number
Operation
VRS Messages
To record a VRS message:
1. Press Speaker or lift the handset.
- OR -
At a single line telephone, lift the handset.
2. Dial 616.
3. Dial 7 ( ecord).
R
4. Dial the VRS message number you want to record (01~100).
5. When you hear, "Please start recording" followed by a beep, record your message.
2 - 1732
Description/Comments
Assign the VRS Message number
used as Private Call Refuse.
When Fixed message is set, VRS
message guidance is: Service
finished. Disconnect the line,
please.
Assign the VRS Message number
used as Caller ID Refuse. When
Fixed Message is set, VRS
message guidance is: Service
finished. Disconnect the line,
please.
Assign the VRS Message number
used as the Preamble Message
for each trunk. When the
extension user answers the
incoming call, the assigned VRS
message is sent to the outside
caller.
The Group Mailbox Number is the
same as the Department Group
master (pilot) number. Select the
Department Group master (pilot)
number associated with the
Master Mailbox you are
programming.
UNIVERGE SV8100
Assigned Data
1
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
0~101
(0 = No message)
(101 = Fixed message)
(default = 0)
0~100
(0 = No Service)
(default = 0)
Digits (eight maximum,
using 0~9)
No Setting
(entered by pressing
Hold)
(default = No Setting)
Voice Response System (VRS)
Level
2 3



