NEC Univerge SV8100 Features And Specifications Manual page 1462

Issue 7.0
Program
Program Name
Number
25-12-01 Alternate Trunk Group Routing
for DISA
34-03-01 Trunk Group Routing for E&M
Tie Lines
Operation
To place a call using Trunk Group Routing:
1. At the multiline terminal, press Speaker.
- OR -
At single line telephone, lift the handset.
2. Dial 9.
3. Dial number.
- OR -
1. At the multiline terminal, press Trunk Group Routing key (Program 15-07 or SC 752:
Also refer to the

2. Dial the number.
2 - 1434
Description/Comments
Define the trunk route selected
when a DISA caller dials the
Alternate Trunk Access Code
assigned in Program 11-09-02.
The route selected is based on the
DISA caller Class of Service,
which is in turn determined by the
password the caller dials. Program
14-06 is used to set up the Trunk
Group Routing.
Assign the Trunk Group Route
chosen when a user seizes a Tie
Line and dials 9. Set Trunk Group
Routing in Program 14-06. If the
system has ARS, dialing 9
accesses ARS.
Call Appearance (CAP) Keys on page
Assigned Data
Trunk Group Routes:
1~100
Day/Night Mode = 1~8
Route Table Number =
0~100
(0 = No Setting)
(default = 1)
Trunk Group Routes:
0~100
(0 = No Setting)
(default = 1)
2-143.
UNIVERGE SV8100
Level
1 2 3


05).

Trunk Group Routing