NEC Univerge SV8100 Features And Specifications Manual page 1049

UNIVERGE SV8100
Program
Program Name
Number
20-03-06 System Options for Single Line
Telephones – Headset Ringing
Start Time (for SLT)
20-03-07 System Options for Single Line
Telephones – Trunk Call Dial
Forced Sending Start Time
(Forced Dial)
20-06-01 Class of Service for Extensions
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-15-01 Ring Cycle Setup – Normal
Incoming Call on Trunk
20-15-03 Ring Cycle Setup – Incoming
Internal Call
20-15-05 Ring Cycle Setup – DID/DDI
80-03-01 DTMF Tone Receiver Setup –
Detect Level
80-03-02 DTMF Tone Receiver Setup –
Start Delay Time
(OPX) Off-Premise Extension
Description/Comments
Define the headset ringing start
time. After this time expires after a
single line telephone is off-hook,
the system sets the single line
telephone to headset ringing
mode.
Define the Trunk Call Dial Forced
Sending Start Time (Forced Dial)
for single line telephones.
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Define the ring cycle for INcoming
Internal calls.
Define the incoming internal call
ringing cycles for each ring type.
Define the ring cycle for DID/DDI
calls.
Use Items 11~32 to set the criteria
for dial tone detection for outgoing
ARS calls.
Define the start delay time for
DTMF Tone Receiver.
Assigned Data
1
0~64800 seconds
(default = 5)
0~64800 seconds
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Ringing Cycle = 1~13
(default = 2)
Ringing Cycle = 1~13
(default = 12)
Ringing Cycle = 1~13
(default = 8)
0 = 0dBm ~ -25dBm
1 = -5dBm ~ -30dBm
2 = -10dBm ~ -35dBm
3 = -15dBm ~ -40dBm
4 = -20dBm ~ -45dBm
5 = -25dBm ~ -50dBm
6 = -30dBm ~ -55dBm
default:
Type 1~5 = 0
0~255
(0.25ms~64ms)
default:
Type 1~5 = 0
Issue 7.0
Level
2 3









2 - 1021