NEC Univerge SV8100 Features And Specifications Manual page 1796

Issue 7.0
Feature Name
Hotline
Message Waiting
Paging, External
Paging, Internal
Quick Transfer to Voice Mail
Ringdown Extension, Internal/External
Station Name Assignment – User
Programmable
Tandem Trunking (Unsupervised Conference)
Account Code Entry
Account Code – Forced/Verified/Unverified
Automatic Release
Automatic Route Selection
Call Forwarding – Centrex
Call Forwarding/Do Not Disturb Override
Call Forwarding, Off-Premise
Callback
Central Office Calls, Answering
Central Office Calls, Placing
Class of Service
Code Restriction
Code Restriction Override
Code Restriction, Dial Block
2 - 1768
Table 2-117 Supported Wireless DECT (SIP) Features (Continued)
SIP DECT
Yes Handset can be a hotline destination, but cannot
originate a hotline call.
Yes Only VM message waiting.
Yes IP DECT handset can only initiate a page, it
cannot receive a page or display page
information.
Yes IP DECT handset can only initiate a page, it
cannot receive a page or display page
information.
Yes MLTs can q/t to the SIP DECT VM, but SIP
DECT handset cannot execute Q/T.
Yes IP DECT handset can only be the ringdown
destination. It cannot initiate ringdown.
Yes Handset name can be programmed in the
handset (it does not show the name in program
15-01-01), but will not display back to IPK II
callers.
Yes Only Tandem Trunking on hangup is supported
with IP DECT.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
UNIVERGE SV8100
Comments SIP DECT
Wireless DECT (SIP)