NEC Univerge SV8100 Features And Specifications Manual page 1548

Issue 7.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-07-01 Department Group Pilot
Numbers – Dial
15-07-01 Programmable Function Keys
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling
Cycle
16-01-03 Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
2 - 1520
Description/Comments
Assign pilot numbers to the
Extension (Department) Groups
you set up in Program
16-02-01~Program 16-02-10.
Assign a Uniform Call Distribution
key (46) so extension users can
install or remove themselves from
the Uniform Call Distribution
Group. Additional keys can also
be assigned for Department Group
features Automatic Transfer (56),
immediate calling destination (58),
delayed calling destination (59),
and DND destination (60).
Assign a name to the Extension
(Department) Groups.
Set the call routing for Department
Calling. Routing can be either
circular (cycles to all phones in
group) or priority (cycles to highest
priority extension first)
Set to 1 for UCD.
Set how the system routes an
Intercom call to a busy
Department Group member.
Intercom callers can hear busy or
route to the first available
Department Group member. This
occurs only for calls to the
extension directly, not the
department number assigned in
Program 11-07.
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
(default not assigned)

Line Key 1~48
0~99 (Normal Function
Code 751 by default)
 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Maximum 12

characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD

Routing (Circular)
(default = 0)
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom

callers to busy
department member
routes to idle member)
(default = 0)
Uniform Call Distribution (UCD)
Level
2 3
