NEC Univerge SV8100 Features And Specifications Manual page 1602

Issue 7.0
Program
Program Name
Number
24-02-03 System Options for Transfer –
Delayed Call Forwarding Time
45-01-01 Voice Mail Integration Options –
Voice Mail Department Group
Number
45-01-02 Voice Mail Integration Options –
Voice Mail Master Name
45-01-04 Voice Mail Integration Options –
Park and Page
45-01-05 Voice Mail Integration Options –
Message Wait
45-01-06 Voice Mail Integration Options –
Record Alert Tone Interval Time
45-01-14 Voice Mail Integration Options –
CCIS Centralized Voice Mail
Number
45-01-15 Voice Mail Integration Options –
Analog Voice Mail Protocol
Selection
45-01-16 Voice Mail Integration Options –
Voice Mail Fax Digit Add
Assignment
45-01-17 Voice Mail Integration Options –
Reply Mailbox Number
45-01-18 Voice Mail Integration Options –
Trunk Number Mapping
2 - 1574
Description/Comments
Set the time a transferred call
waits at a forwarded extension
before routing to the called
extension mailbox.
Assign which Extension
(Department) Group number is
used for the voice mail group.
Assign the Voice Mail master
name.
Enable/Disable the system ability
to process the Voice Mail Park and
Page () commands. You should
normally enable this option.
Enable/Disable the system ability
to process the Voice Mail
#
Message Wait ( ) commands.
You should normally enable this
option. If enabled, be sure that the
programmed Message Notification
strings do not contain the code
for trunk access. When using an
external voice mail and centrex
transfer, this option should be
disabled or the service code
Program 11-12-42 must be
changed.
Set the time between Voice Mail
Conversation Record alerts.
Assign the pilot number to
Centralized Voice Mail over CCIS
link. Assign only in remote
switches.
Assign whether fixed codes or
codes used in Program 45-04 are
used for analog voice mail
protocol.
Assign up to four digits in front of
the station number sent to the SLT
port when a call is forwarded.
Determine Whether or not to
include the mailbox number in the
analog voice mail protocol.
Assign the digits of trunk number
mapping.
UNIVERGE SV8100
Assigned Data
0~64800 (seconds)
(default = 10)
Department Groups:
0~64
0 = No Voice Mail
(default = 0)
Up to 12 Characters
(default = Voice Mail)
0 = Off
1 = On
(default = 1)
0 = Off
1 = On
(default = 1)
#
9
#
3 in
0~64800 (seconds)
(default = 30)
Dial (up to eight digits)
(default = No Setting)
0: Fixed
1: Program
(default = 0)
Up to four digits
(default not assigned)
0 = No
1 = Yes
(default = 1)
2~3
(default = 2)
Level
1 2 3











VM8000 InMail