NEC Univerge SV8100 Features And Specifications Manual page 1595

UNIVERGE SV8100
Central Office Calls, Placing
Clock/Calendar Display
Direct Inward Line (DIL)
Hold
Message Waiting
One-Touch Calling
Programmable Function Keys
Transfer
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
10-09-01 DTMF and Dial Tone Circuit
Setup
VM8000 InMail
Description/Comments
Assign at least one circuit for
DTMF reception ( 0 or 1).
Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one

DTMF receiver for every 10
devices that use them.
In heavy traffic sites, allocate

one DTMF receiver for every
five devices that use them.
Assigned Data
1
0 = Common Use
1 = Extension Only
2 = Trunk Only
Default:
Circuit/Resource
01~08 = 1 (Extensions)
Circuit/Resource
09~32 = 2 (Trunks)
Circuit/Resource
33~96 = 0 (Not Used)
Circuit/Resource
97~160 = 0 (Common)
When PZ-BS10 is
installed, 97~160 are
available.
Issue 7.0
Level
2 3

2 - 1567