NEC Univerge SV8100 Features And Specifications Manual page 1792

Issue 7.0
Default Setting
Disabled
Related Features
Central Office Calls, Answering
Central Office Calls, Placing
Direct Inward System Access (DISA)
Intercom
Long Conversation Cutoff
Single Line Telephones, Analog 500/2500 Sets
Code Restriction
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-17 Basic Trunk Data Setup – Trunk
to Trunk Warning Tone for Long
Conversation Alarm
14-01-25 Basic Trunk Data Setup –
Continued/Discontinued Trunk-
to-Trunk Conversation
2 - 1764
Description/Comments
Determine whether DISA callers
should hear the Warning Tone for
Long Conversations.
When Program 24-02-10 is set to
disconnect a trunk after the
defined time, determine whether
or not a user can use the continue/
discontinued code.
UNIVERGE SV8100
Assigned Data
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 0)
Warning Tone for Long Conversation
Level
1 2 3

