NEC Univerge SV8100 Features And Specifications Manual page 1770

Issue 7.0
Program
Program Name
Number
25-06-02 VRS/DISA One-Digit Code
Attendant Setup – Destination
Number
40-07-01 Voice Prompt Language
Assignment for VRS
40-10-01 Voice Announcement Service
Option – VRS Fixed Message
Operation
VRS Messages
To record a VRS message:
1. Press Speaker or lift the handset.
-OR-
At a Single Line Telephone, lift the handset.
2. Dial 616.
3. Dial 7 (Record).
4. Dial the VRS message number you want to record (001~004).
5. When you hear, "Start recording at the tone and press the POUND key when you are done"
followed by a beep, record your message.
2 - 1742
Description/Comments
Set up single digit dialing for
Automated Attendant callers. For
each VRS Message programmed
to answer outside calls (see
Program 25-02-01), specify the
destination reached (eight digits
maximum) when the caller dials
the single digit code.
Select the language prompt set
that has been uploaded for
Embedded VRS. Although the
system allows this option to be
changed in programming, the
language changes only if the
appropriate Embedded VRS
language prompt set has been
uploaded to the CCPU.
Enable (1)/Disable (0) the system
ability to play the fixed VRS
messages (such as You have a
message).
Voice Response System (VRS) Embedded VRS
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
(default not assigned)
1 = US English
4 = CA French
6 = Mex Spanish
(default = 1)
0= Not Used
1= Used 
(default = 0)
Level
2 3

