NEC Univerge SV8100 Features And Specifications Manual page 1624

Issue 7.0
Program
Program Name
Number
41-19-02 ACD Voice Mail Delay
Announcement – Mailbox
Number for 1st Announcement
Message
41-19-03 ACD Voice Mail Delay
Announcement – 1st Delay
Message Sending Count
41-19-04 ACD Voice Mail Delay
Announcement – Mailbox
Number for 2nd Announcement
Message
41-19-05 ACD Voice Mail Delay
Announcement – 2nd Delay
Message Sending Count
41-19-06 ACD Voice Mail Delay
Announcement – Wait Tone
Type at Message Interval
41-19-07 ACD Voice Mail Delay
Announcement – ACD Forced
Disconnect Time after 2nd
Announcement
41-19-08 ACD Voice Mail Delay
Announcement – Delayed
Message Interval Time
47-03-02 SV8100 InMail Group Mailbox
Options – Mailbox Number
47-03-03 SV8100 InMail Group Mailbox
Options – Mailbox Type
2 - 1596
Description/Comments
Assign Voice Mail ACD
Announcement Mailbox as the
message source for the 1st
Announcement Message.
Determine the 1st Delay Message
Sending Count. This entry must
be set to 1 or higher for the
message to play.
Assign Voice Mail ACD
Announcement Mailboxes as the
message source for the 2nd
Announcement Message.
Determine the 2nd Delay Message
Sending Count. This entry must
be set to 1 or higher for the
message to play.
Determine what the caller hears
between the messages.
Assign the time the system waits
after the end of the ACD delay
message before disconnecting.
Set the time between Delayed
Messages.
The Group Mailbox Number is the
same as the Department Group
master (pilot) number. Use this
option to select the Department
Group master (pilot) number
associated with the Master
Mailbox you are programming.
Set the Master Mailbox type.
UNIVERGE SV8100
Assigned Data
1
Dial
(up to eight digits)

(default = No Setting)
0 = No message is
played.
1~255
(default = 0)
Dial
(up to eight digits)
(default = No Setting)
0 = No message is
played.
1~255
(default = 0)
0 = Ring Back Tone
1 = Music On Hold
Tone
2 = Background Music
Source
(default = 0)
0~64800 (seconds)
(default = 0)
0~64800 (seconds)
(default = 20)
Digits (eight maximum,
using 0~9)
No Setting (entered by
pressing Hold)
(default not assigned)
0 = None
1 = Subscriber
2 = Routing
(default = 1)
VM8000 InMail
Level
2 3







