NEC Univerge SV8100 Features And Specifications Manual page 1202

Issue 7.0
Program
Program Name
Number
15-03-06 Single Line Telephone Basic
Data Setup – Extension Polarity
Reverse
15-03-07 Single Line Telephone Basic
Data Setup – Enabled On-Hook
When Holding (SLT)
15-03-08 Single Line Telephone Basic
Data Setup – Answer On-Hook
when Holding (SLT)
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
15-03-10 Single Line Telephone Basic
Data Setup – Caller ID Name
15-03-11 Single Line Telephone Basic
Data Setup – Caller ID Type
15-03-14 Single Line Telephone Basic
Data Setup – Forwarded Caller ID
Display Mode
20-03-01 System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
20-03-02 System Options for Single Line
Telephones – Ignore Received
DP Dial on DTMF SLT Port
2 - 1174
Description/Comments
-- Not Used in U.S. -- Do Not
Change Default Entry as DTMF
issues may arise with voice mail.
Enable/Disable this program step.
Enable/Disable Answer ON-Hook
when Holding for SLT terminals.
Enable/Disable the Caller ID FSK
signal for an external Caller ID
module or a 3rd-Party vendor
telephone with Caller ID display.
Important:
If voice mail is used, this setting
must be disabled for the system
integration codes to be correct.
With a 2500 set (no Caller ID)
installed, this must be set to 0 for
incoming callers to have a talk
path.
Determine if an extension user
telephone should display the
Caller ID name.
Determine whether the Caller ID
type is FSK or DTMF.
Determine what the display shows
when a multiline terminal receives
a forwarded outside call.
For a busy single line (500/2500
type) telephone, set the mode
used to answer a camped-on trunk
call.
For ESL sets, enable this option
(1) to allow the user to dial Service
Code for Voice Mail Conversation
Record.
Define whether the system should
receive dial pulse and DTMF
signals (0) or ignore dial pulse and
only accept DTMF signals (1).
Single Line Telephones, Analog 500/2500 Sets
UNIVERGE SV8100
Assigned Data
1
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = Disable
(No)
1 = Enable
(Yes)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
0 = Calling Extension
Number (Calling)
1 = External Caller ID
(Forward)
(default = 0)
0 = Hookflash
(Hooking)
1 = Hookflash +
Service Code 654
(default = 0)
0 = Do not ignore (No)
1 = Ignore (Yes)
(default = 0)
Level
2 3








