NEC Univerge SV8100 Features And Specifications Manual page 1608

Issue 7.0
Program
Program Name
Number
47-01-17 VM8000 InMail System Options –
InMail Port
47-02-01 VM8000 InMail Station Mailbox
Options – Mailbox Type
2 - 1580
Description/Comments
Specify the port number of the first
InMail Port.
Setting this program requires

a CD-CP00-US reset for the
changes to take effect.
With software Version 1.11

or higher the following rules
apply when programming
VM8000 InMail ports in
program 47-01-17 on a
system that has the basic 64
port license:
When a PZ-ME50 is NOT

mounted to CCPU-US.
The first port of VM800

InMail must be assigned
to port 57 or lower.
The number of licensed

VM8000 InMail ports do
not take away from the 64
port license. There can
still be a combination of
64 trunks, TDM phones
and IP phones.
When a PZ-ME50 is

mounted to CCPU-US:
The first port of VM800

InMail can be assigned
above port 64.
Enable/Disable the mailbox. An
extension mailbox is not
accessible when it is disabled
(even though its stored messages
and configuration are retained in
memory.) If disabled, a user
pressing Message initiates a
remote logon and is asked to enter
their mailbox number. A voice
prompt then announces: That
mailbox does not exist.
To make programming easier,
consider associating a mailbox
number with a station port. For
example, mailbox 1 could
correspond to port 1, which in turn
corresponds to extension 101.
UNIVERGE SV8100
Assigned Data
1
0~497
The first port of In-Mail
must start with one of
the following ports:
1, 5, 9, 12, 16, ......237,
241, 245, 249 and uses
the first port assigned +
next three consecutive
ports.
(default = 0)

0 = None
1 = Personal
2 = Group
(default = 1)

VM8000 InMail
Level
2 3