NEC Univerge SV8100 Features And Specifications Manual page 1603

UNIVERGE SV8100
Program
Program Name
Number
47-01-02 VM8000 InMail System Options –
VM8000 InMail Master Name
47-01-03 VM8000 InMail System Options –
Subscriber Message Length
VM8000 InMail
Description/Comments
The CHS2U GW-US must be
reset for a change to this program
to take effect. Use this option to
modify the name for all VM8000
InMail ports. The system briefly
displays this name when a display
multiline terminal user calls a
Voice Mail port (either by pressing
Message, their voice mail key, or
by dialing the master number).
You should always end the name
with the ## characters. The
system substitutes the port
number for the last #. Using the
default name InMail ##, for
example, the telephone display
shows VM8000 InMail #1 when
calling port 1.
Set the maximum time for
recorded messages for:
Subscriber Mailbox users

dialing RS to record and send a
message.
Extension users leaving a

message in a Subscriber
Mailbox.
Outside Automated Attendant

callers accessing a mailbox via
a GOTO command and then
dialing RS to record and send a
message.
Subscriber Mailbox Greetings.

Announcement Messages.

Call Routing Mailbox

Instruction
Menus.
The Conversation Record

time is 10 times the
Subscriber Message time.
Since the Conversation
Record time cannot exceed
4095 seconds, any setting in
Subscriber Message time
longer than 409 has no effect
on the length of recorded
conversations.
Assigned Data
1
Up to 12 characters
Default:
##
InMail
(The system
substitutes the port
#
number for the when
calling the port).
1~4095 (seconds)
(default = 120)
Issue 7.0
Level
2 3


2 - 1575