NEC Univerge SV8100 Features And Specifications Manual page 1470

Issue 7.0
Central Office Calls, Placing
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-04 Service Code Setup (for Service
Access) – Set Camp-On
11-12-05 Service Code Setup (for Service
Access) – Cancel Camp-On
11-16-05 Single Digit Service Code Setup
– Camp-On
15-07-01 Programmable Function Keys
20-01-08 System Options – Trunk
Queuing Callback Time
20-01-09 System Options – Callback/
Trunk Queuing Cancel Time
2 - 1442
Description/Comments
Customize the Service Code used
for setting Camp-On.
Customize the Service Code,
used for cancelling Camp-On.
Customize the 1-digit Service
Code used for setting Camp-On.
Assign a function key for Trunk
Queuing and Trunk Camp-On
(code 35).
Set the Trunk Queuing Callback
Time. Trunk Queuing Callback
rings an extension for this time.
Set the Callback/Trunk Queuing
Cancel Time. The system cancels
an extension Callback or Trunk
Queuing request after this time.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 750)
MLT, SLT
(default = 770)
#
(default = )
Trunk Groups: 1~100
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
0~64800 (seconds)
(default = 15)
0~64800 (seconds)
(default = 64800)
Trunk Queuing/Camp-On
Level
2 3




