NEC Univerge SV8100 Features And Specifications Manual page 1221

UNIVERGE SV8100
Program
Program Name
Number
20-13-12 Class of Service Options
(Supplementary Service) – Room
Monitor, Extension Being
Monitored
20-13-13 Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
20-13-14 Class of Service Options
(Supplementary Service) –
Department Calling (PLT No
Called Extension)
20-13-15 Class of Service Options
(Supplementary Service) –
Barge-In, Initiate
20-13-16 Class of Service Options
(Supplementary Service) –
Barge-In, Receive
20-13-17 Class of Service Options
(Supplementary Service) –
Barge-In Tone/Display (Intrusion
Tone)
20-13-18 Class of Service Options
(Supplementary Service) –
Programmable Function Key
Programming (General Level)
20-13-19 Class of Service Options
(Supplementary Service) –
Selectable Display Messaging
(Text Messaging)
20-13-20 Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
20-13-21 Class of Service Options
(Supplementary Service) –
Extension Name
SLT Adapter
Description/Comments
Turn Off or On an extension user
ability to be monitored by other
extensions.
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on an extension.
Turn Off or On an extension user
ability to call a Department Group
Pilot.
Turn Off or On an extension user
ability to barge-in on other's calls.
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Turn Off or On the Barge-In
(Intrusion) Tone. If disabled, this
also turns off the Barge-In display
at the called extension.
Turn Off or On an extension user
ability to program General function
keys using Service Code 751 (by
default). (Refer to Program
20-07-10 for Service Code 752.)
Turn Off or On an extension user
ability to use Selectable Display
Messaging.
Turn Off or On operator alert when
an extension user improperly
enters an Account Code or
violates Toll Restriction.
Turn Off or On an extension user
ability to program its name.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 7.0
Level
2 3










2 - 1193