NEC Univerge SV8100 Features And Specifications Manual page 1771

UNIVERGE SV8100
6. Press to end recording.
#
-OR-
Hang up to save the message.
To listen to a previously recorded VRS message:
1. Press Speaker or lift the handset.
-OR-
At a Single Line Telephone, lift the handset.
2. Dial 616.
3. Dial 5 (Listen).
4. Dial the VRS message number to which you want to listen (001~004).
You hear the previously recorded message. If you hear a beep instead, no previous message is recorded.

5. Press to hear the message again.
#
-OR-
To hear another message, dial 5 and then enter the message number (001~004).
-OR-
Hang up.
To erase a previously recorded VRS message:
1. Press Speaker or lift the handset.
-OR-
At a Single Line Telephone, lift the handset.
2. Dial 616.
3. Dial 3 (Erase).
4. Dial the number of the VRS message you want to erase (001~004).
5. Press Hold (multiline terminal only) to cancel the procedure without erasing (and return to step 3).
-OR-
Hang up to erase the message.
Voice Response System (VRS) Embedded VRS
Issue 7.0
2 - 1743