NEC Univerge SV8100 Features And Specifications Manual page 894

Issue 7.0
Program
Program Name
Number
14-07-01 Trunk Access Map Setup
15-06-01 Trunk Access Map for
Extensions
15-07-01 Programmable Function Keys
15-13-01 Loop Key Data – Outgoing
2 - 866
Description/Comments
For Outgoing Line Preference and
Auto-Answer of Non-Ringing
Lines, set up the Trunk Access
Maps.
Assign trunks to trunk groups. In
general, loop keys access trunks
within specific trunk groups.
Program function keys as trunk
group/loop keys (*02 or *05). For
additional data, enter 0 (incoming
only), 1 (outgoing only) or 2 (both
ways). Use Programs 15-13-01 or
15-13-02 to define the trunk
groups used.
Assign trunk groups for outgoing
loop keys (0=ARS, Trunk Groups
1-100). Selecting "0" for ARS
should only be used when ARS is
enabled in Program 26-01-01 or it
could cause the loop key to lock
up.
UNIVERGE SV8100
Assigned Data
1
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
Trunk Access Maps:
1~200
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Trunk Group: 0~100

Level
2 3


Loop Keys